Skip to content
It is against the law to sell or supply vape products to, or to obtain vape products on behalf of, a person under the age of 18 years.
It is against the law to sell or supply vape products to, or to obtain vape products on behalf of, a person under the age of 18 years.
How to prime coils?

How to prime coils?

How to prime coils?

Priming your coils is important when you buy or install a new coil. Not doing this correctly can be expensive and can result in a poor vaping experience.

Step One

Drip your e-liquid on the outside of the exposed cotton on your coil to start the priming process

Note: Do not excessively prime the cotton as this could result in leakage

Step Two

Now you are ready to reassemble your tank with the wicked coil. Screw or push your coil back into the tank. Once it is assembled, you can fill your tank with e-liquid and close the tank lid.

Note: don't leave the tank fill port open as this can result in leakage.

Step Three

Take at least 5 big draws into the tank without pushing the fire button on your mod. This will help to pull extra juice into any dry cotton. For pod systems or Vapes with Auto fire feature, keep the pod OFF device and take at least 5-10 draws into the pod to pull juice into the cotton before attaching to your device .

We also recommend letting your juice sit in the tank for 5 to 10 minutes without vaping to ensure the cotton is primed.

Step Four

You are now ready to vape.

Always start lower than the recommended wattage, E.g. 60w-80w coil, start vaping at 40w for 5 vapes, then 45w for 5 vapes and so on. If you can't lower wattage on your device, make sure to take small draws for first 10 vapes

Looking for replacement coils? Click here to see the full Vape Joint range.

Previous article How to use a dry herb vape?
Next article Mouth to lung (MTL) vs Direct to lung (DTL) - What's the difference?