Vape Tanks Australia

Vape Tanks Australia

At The Vape Joint we have you covered with the best vape tanks available in Brisbane, Australia. Order now and enjoy free express shipping Australia wide with all orders over $75. Also, check out our three stores in Brisbane, Queensland at North Lakes, Mount Warren and Browns Plains.

Vape tanks are a significant component of vaping as they hold your e liquid along with the coil that enables it to vaporize. They also help in soaking the wick and priming the coil for your vape devices to work. The tanks are made from materials such as stainless steel, plastic, or Pyrex. Apart from the material, you may choose a vape tank depending upon some of the following criteria's:

  • Size (how many ml’s does the tank hold)
  • Vaping feel (Mouth to lung or Direct to lung) Click here to learn more
  • Wattage range of coils for the tank (higher wattage ranges are DTL (>30w) and lower wattage (<30w) ranges are MTL)

There is a really simple process you can follow to clean your vape tank. Firstly, detach your vape tank from the vape mod and then fill a bowl with warm water. Dispose of any e-liquid possibly left in the vape tank, disassemble the vape tank and then wash each constituent part in the bowl of warm water. Dry off each component with a clean towel, let it dry for 20-30 minutes and then reassemble your device.

Your vape coil can’t be cleaned, as getting it wet will badly damage it! Needing to replace vape coils is a natural part of the vaping process, so check our products if your coil is looking a little worse for wear.

It’s there, sitting in front of you. Ready to go. You’re excited, we’re excited. But where to next?

Firstly, unpack your vape device. Pretty simple first step, right? Second to this, make sure you set it up on a flat surface.

Next, fill your vape tank or vape pod with your e-liquid. If you have a pod system, locate the filling cavity on your pod. It should be clearly marked on your device and in the instructions that come with it. If it’s a vape tank, it will be clearly marked. Carefully fill the tank or pod.

Prime your vape coil or vape pod. This means you need to let your device rest for at least 10 to 15 minutes while the coil is soaked with e-liquid. Not waiting for this can cause your coil to burn out! Alternatively, you can drip e-liquid on each entry point of the coil, and then take five to ten deep pulls of air without putting the tank onto the device. This will help bring the juice into the vape coil properly.

You may encounter some issues with vape tanks, including leakage, spitting, and popping. Make sure the seal of your vape tank is properly fastened without skipping any threads. It should be tight along with the threads to prevent any liquid from getting out of the space.

Also, check the chimney for leaked e-juice as it may result in leaking and gurgling. Clean the chimney with a paper towel and let it completely dry. Another thing to take into consideration is to keep your vape tank upright when not in use. 

Lastly, check the o-rings and see if there is any wear and tear. These rings help in sealing the vape tank. Any compromise to the o-rings will result in leakage. Once the rings are damaged, it is ideal for replacing them with new ones that fit your device. 

Issues such as spitting and popping occur when droplets of hot e-liquid shoot into the mouth while vaping. This is due to the vape liquid pooling over the coil and cooking up with the heat. Instead of vaporizing, it becomes hot and causes spit-back. You need to avoid flooding the vape tanks and over-priming the coils to prevent this from happening. Also, reduce the airflow while inhaling and let the coil work on its own. 

If you’re a novice to the world of vape tanks, it can feel overwhelming when you see the range available in the market. But don’t worry. This guide will teach you everything you need to know about a dry herb vape tank and learn how to make an informed purchase decision.

What is a Vape Tank?

A vape tank is a vital component of the e-cigarette or mod. It is used to store the e-liquid and contains the coil responsible for vapourization. The design of most vapes is such that the position of the tank is on top of the battery. Generally, the shape of the tank is cylindrical, with glass bodies and a metallic top and bottom. In the centre, you can see a stem running up. This stem attaches to a coil at the bottom and then moves to the mouthpiece.

When you need to buy a vape tank, you need to choose one that matches your desired vaping style. Moreover, it needs to have the right feature set for your needs. Here are the four factors you must keep in mind.

Easy to Fill

How you are able to fill the tank can enhance the experience of using a vape. Vape Tanks have swivel/slide, screw top  flip open option or bottom fill. You can choose the style you like. Below we provide a viewpoint on each of these options:

  • Swivel or Slide – This option makes it easy to fill the vape tank with e-liquid, however, over time certain tanks can lose its swivel resistance and can cause leakage as the swivel function can open by itself
  • Screw – This is fast becoming one of the most popular forms, as it provides to the best experience to avoid leakages and makes it easy to access the tanks fill point
  • Flip – These are normal press activated and provided more security against vape tanks accidentally opening in your pocket or bag. The typically last the test of time
  • Bottom Fill – This is common in most Pyrex based pod tanks. It is typically a rubber seal that forms the seal on the fill point. It is generally quite secure, but can be hard to grip if you have large fingers

 

Adjustable Airflow

Some vapers like the free, open airflow for deep inhaling Others prefer tight airflow characteristics  A simple way to understand what might you suit you is to relate it to smoking. If you are seeking a draw that is like a cigarette then you want a Mouth to Lung Tank with dotted and/or restricted airflow and smaller mouthpiece to reduce the amount of vapour, feel more like a cigarette and avoid that cough from vaping. If you are seeking a draw that is like natural breathing motion or chasing clouds then you want a Direct to Lung Tank with larger airflow vents and mouthpiece to maximise the vape production. Therefore, choose a vape tank that provides an adjustable airflow collar. This way, you can enjoy the level of airflow resistance you prefer.

Leak-free Design

The design of a modern vape tank is such that it has two large intake vents on the bottom. Moreover, it has a wide mouthpiece at the top. And the e-liquid stays in its place. However, some sub-ohm tanks are designed with tight tolerances. With silicone or rubber gaskets, they can ensure a perfect seal. Therefore, look for models and units that provide a leak-free design. They are the best vape tanks for flavour since they do not result in any wastage.

Coil Selection

Manufacturers design vape tanks for different vaping experiences. Therefore, it is important to consider what coils are available for each tank. As an example – if you enjoy vaping at 30 watts, then picking a tank that only has coils from 80 watts to 120 watts won’t be a good fit as it will result in juice leakage, lack of flavour and coil burn out. This is also applicable in a vice versa situation. It is important to understand your vape style (e.g. less clouds, more clouds)and ideal wattage as this will help you select the most suitable tank for you.

Wrapping up

Any vape tank you choose should be able to let you enjoy vaping the way you like it. Some people desire maximum possible convenience, while others want control over every aspect of the vaping experience. A vape tank with pre-built replaceable coils is also worth a try. When the coil fails to provide an acceptable flavour quality, the vaper can replace the coil with a new pre-built version. Such a vape tank delivers the best vaping experience by combining control and convenience.

Sub-ohm tanks, also known as sub-ohm clearomizers or sub-tanks, refer to tanks with a coil resistance of less than 1.0Ω. But the term is popular for recognizing tanks that use factory-built, pre-made, removable coil. The resistance of the removable coil heads is lower than 1.0Ω and either screws or plugs into the base of your tank.

The Working of Sub-Ohm Tanks

A sub-ohm tank is like a regular vape tank, however they are better suited for higher-powered vaping setups due to its general construct of a wide-open airflow that leads to greater cloud production. The way a sub-ohm tank works is, once you have set up your tank with a coil and filled your desired e-liquid, the coil will soak up your e-liquid into the cotton. As a result, when you fire you vape device, it will heat up, resulting in its vaporization.

A large chunk of the vaping market made up of vape shops online in Australia, are made up of sub-ohm tanks and generally feature a top filling system as well.

Advantages of Sub-Ohm Tanks

  • High-wattage vaping
  • Intense flavor
  • Wide-open airflow
  • Compatible with high-VG e-liquid
  • Big clouds
  • More convenient than rebuildable vape tanks

Sub-ohm tanks have drastically increased in popularity due to vapor production and intense flavor that is often compared to the best rebuildable vape tanks. As a result, vapers are no longer required to build their own coils and learn about the different wire types and resistances. They are free to use factory-built replaceable coils in the sub-ohm tanks to enjoy the same experience. Unlike high-resistance MTL tanks, most sub-ohm tanks and their designated coils are compatible with high VG vape juices.

Sub-ohm tanks deliver extraordinarily intense flavor, like low resistance rebuildables. It is because of the wide-open airflow; higher vapor production and the additional aspect of mesh vape coils available in the market. With many of the available sub-ohm tanks, you can also experiment with many coils for the same tank, so you can be sure to find the experience of flavor best suited to yourself.

Filters

Sort by:
0

No products match those filters.

Clear all